Izdelki za oto b w 702 kupé (12)

For sliding properties improvement of machine parts, apparates and precision machinery, e.g. under the influence of oxygen, in vacuum or radioactive radiation Dry lubrication for tools or workpieces in cold- and thermoforming For incorporation in plastics, sealings, packages, sintered metals and improvement of sliding properties For long-term or possibly lifetime-lubrication Advantages and benefits Reduces friction and wear in a wide temperature range High effectiveness due to high affinity of MoS₂ to metals Low friction at highest load capacities Low consumption based on forming of extreme thin sliding films Not electrically conducting and not magnetic Chemically stable except against halogenated gases, concentrated sulfuric- and nitric acidFor best adhesion, clean sliding surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. Apply on small parts in series production by tumbling, under addition of small amounts powder and tumbling Operating temperature:-185 °C → +450 °C Press-fit:µ = 0.04, no chatter Particle size:16.0 - 30.0 µm, max. 190 µm

Das Premium-Glasfalz-Silikon

Our yarns are used in weaving, knitting and knitwear as well as women's / men's clothing, military, safety and outdoor clothing, as well as lace, socks, seamless clothing, sportswear and technical textiles. Polyamide (nylon) yarns are also used in fabric production together with natural or other synthetic yarns. Denier : 90- 100 Filament :48 Yarn Type :FDY Yarn Type :Textured Yarn cross-section :round Color :half mat Color:Full mat Color:Dope Dyed

Synthetischer Mineralstoff, als Füll- und Abstreumaterial für Kunstharzsysteme. Das kubisch-kantige Korn aus elektrometallurgischem Schmelzprozess ist besonders abriebfest und griffig. Einsatzmöglichkeiten im Industriebodenbau wie auch im Straßenbau. Haupteinsatzgebiete sind Molkereien, Brauereien, Schlachthäuser, Nassbetriebe, chem. Fabriken, Batterieräume, Rampen und Parkhäuser. Auch geeignet für Fahrbahnen, Fahrradwege, rutschfeste Brückenbeschichtungen und Übergänge, z. B. in Flughäfen. Eigenschaften:verschleißfest gute Kubizität hoher Polierwert Lieferform:25 kg Papierspezialverpackung

maxit therm 815/815 VZ

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):100 mm²/s

Lubrication of dirt-sensitive sliding points in mechanisms Assembly lubrication with large lubricant reservoir, e.g. chucks in which a supplemental relubrication at longer intervals with grease guns is possible Advantages and benefits Excellently suited for dirt-free assembly and long-term lubrication Highly effective due to optimum solid lubricant combination Broad range of uses in area of parts sensitive to soiling Low consumption due to formation of highly effective lubricating films Good corrosion protection behaviour For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants. Operating temperature:-25 °C → +125 °C Press-fit:µ = 0.14, no chatter Four-ball test rig (welding load):5,000 N Thread friction (M10/8,8):µ total = 0.09

Lubrication of closed toothed gearin Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1-registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):220 mm²/s FZG damage level:power level > 12

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):2,000 mm²/s

Lubrication of chains and machine elements operated outdoors Multi Oil also at higher temperatures Advantages and benefits Good lubricating properties Good creep capacity Biodegradable VOC-free Can be used up to 160°C Silicone-free Percentage of renewable raw materials > 90% Spray version OKS 8601 Operating temperature:-5 °C → +160 °C Density (20 °C):0.92 g/ml Viscosity (40 °C):35 - 40 mm²/s

Removing of dirtiness, solving and dissolving of sugar crusts in the candy industry Lubrication of rocker arms, chain joints, spindles, sensors and claws at wrapping and packaging machines, thin foil and tablet machines Food save lubricant for deep drawing and shaping Advantages and benefits Free from animal fats and dairy products for the candy, beverage and pharmaceutical industry Good wear protection and corrosion prevention Sanitarily harmless according to german LFGB The ingredients are accepted according to the FDA regulation 21 CFR 178.3570 NSF H1 registered Cost effective through rapid dissolving of sugar crusts All-purpose oil because of its good cleaning and lubrication properties Reduces abrasion and allows extended maintenance periods MOSH/MOAH-free Operating temperature:-5 °C → +80 °C Density (20 °C):1.06 g/ml Viscosity (40 °C):20 - 24 mm²/s

Der extrem wasserbeständige Premium-Hybrid-Klebstoff